For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.
If you look anywhere online this brake controller is highly regarded as basically the best brake controller available.
I attached a review video... view full answer...
The original Falcon tow bar, the Falcon 5250, has been discontinued for a few years now and was replaced by the Falcon 2, # RM-520 with upgraded components. Otherwise it functions basically the same was as the original Falcon. Both are RV mount tow bars, both have the Autowlok system and telescoping arms. The Falcon 2 has a higher capacity at 6,000 pounds.
There is also the Falcon All Terrain tow bar, # RM-522. It is also rated for 6,000 pounds. The advantage it has is that it is a non-binding... view full answer...
While we do not have a custom fit trailer hitch receiver that is confirmed to fit your 2008 Country Coach Allure Motorhome you may be able to install a universal Class V hitch like the Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2" Receiver - 44" Wide # C87CR which works with vehicle frames between 18" - 44" wide.
The # C87CR has a 2-1/2" receiver, a 2000lb tongue weight rating, and 20000lb trailer weight rating, but will need to be welded to the frame of your vehicle by a... view full answer...
If you currently have a Kwikee 42 Series electric step on your 1999 Country Coach Motorhome yes, the Lippert Kwikee 42 Series Electric Step # LC372779 that you referenced will bolt right up as a replacement using the same mounting attachments. view full answer...
The Atwood Air Command RV AC Unit part # AT15033-22 that you referenced would be an excellent choice for what you are looking for. It has a heat pump like you are wanting, a higher BTU rating of 15k, and it's designed for ducted applications like you have as well. view full answer...
We do offer replacement parts for the SMI Air Force One Supplemental Braking System # SM99243.
These items include a replacement Installation Kit for the motorhome, part # SM99627, a Replacement Towed Vehicle Installation Kit # SM99226 as well as other smaller individual parts such as a replacement Air Jumper # SM99666. You can see all replacement parts by clicking on the linked page for the Air Force One and scrolling down to the heading Replacement Parts. view full answer...
The Trailer Idler Hub Assembly part # AKIHUB-5475-35-EZ-K is compatible with the Timbren Axle-Less Trailer Suspension System part # ASR3500S04 and has the 5 on 4-3/4" bolt pattern you are after. If you want to add brakes you would need the Trailer Hub and Drum Assembly part # AKHD-5475-35-EZ-K and Electric Trailer Brake Kit part # AKEBRK-35-SA instead. Also, the Mounting Hardware for 10" Brake Assemblies part # BRKH10B would be needed if adding brakes.
The Timbren Axle-Less Trailer Suspension... view full answer...
The Firestone Standard Air Spring, Double Convoluted, 1/8" NPT - Model 267C1.5 part # F6397 has a 2,500 lb weight capacity.
If this won't work for you please provide me with the model number of your air bag kit as we cannot look up air bags based on the specs alone. view full answer...
I would love to help but the issue is that your Atwood Water Heater EHP10 is obsolete and has been for a very long time. I spoke to my contact at Atwood/Dometic and they informed me that there is no replacement wiring harness for the limit switch.
Therefore, your only option is going to be a full replacement and for that we have the Atwood RV Water Heater part # AT94186 which has a 10 gallon capacity just like you have now but is both gas and electric whereas yours I believe is only electric.... view full answer...
Hi Pete,
The Voyager Camera Adaptor # 31300006 would allow you to connect a Voyager RV Side Camera # VCMS12LGPR to a system with RCA ports. The yellow connector is for composite video and the white is for audio. Since you don't currently have audio you can just leave the white connector unplugged. The two power wires can be spliced into a nearby 12v power source and the 4-pin connector would connect to the camera. We offer the passenger side camera with a white cover with part # VCMS50RWT.... view full answer...
Go To Results